Products on sale
Astm A335 P5 Q345e Square Cold-Rolled Precision Small Diameter Thick Wall Seamless Steel Pipe
Related products
描述
Alloy steel is alloyed with many materials including molybdenum, chromium, nickel, manganese, and a few trace elements. An Alloy Steel Pipe provides moderate corrosion resistance. These pipes are used in applications where the carbon steel pipes cannot suffice. They are designed with excellent mechanical properties. These steel alloy pipes have a tensile strength of minimum 415Mpa and yield strength of minimum 205Mpa. The ASTM A335 Pipe is a high-temperature pipe. These pipes can withstand temperatures up to 375 degrees C. They are widely used in petrochemical, oil and gas, nuclear industries, etc.
Pipes and tubes are produced either seamlessly or through welding procedures. Alloy Steel Seamless Pipe is produced with the help of a single billet and without any welds. They are available in sizes of ½ to 26mm. They are very durable and easy to maintain. The Alloy Steel Welded Pipe is designed by welding pieces of steel together longitudinally. These pipes have an outer thickness of 0.3-50mm. They can be availed in a beveled or a plain end. The Seamless Alloy Steel Pipe is costlier than the welded pipe as it has 20% extra working pressure. These pipes are furthermore resistant to corrosion. The Alloy Steel ERW Pipe is manufactured by passing electricity through steel sheets. These pipes are cold-rolled to give them smooth and desired properties. Our experienced staff makes use of the best raw materials and the latest technology while producing the Alloy Steel Pipe, along with our other products.
The Alloy Pipe Price depends on the wall thickness and the size of the pipe. An alloy pipe is available as less as 130INR per kg to 3,000INR per kg. The Boiler pipe material we used to make boiler tubes and pipes is extremely strong. These pipes suffice in temperatures up to 450 degrees C, and they don’t dissociate easily.
Alloy Steel Welded Pipe and ASME SA 335 Drill Pipes are suitable for High Temperature applications and boilers
Supplier and exporter of ASTM A335 Seamless Ferritic Alloy Steel Pipes and Large size fabricated AS Pipe material in India
ASTM A335 PIPES | ASTM A335 GR P5 PIPES | ASTM A335 GR P9 PIPES | ASTM A335 GR P11 PIPES | ASTM A335 GR P22 PIPES | ASTM A335 GR P91 PIPES
Size Range: 1/8″ – 26″
Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH
Alloy steel pipes are available with specifications like: ASTM A335 GR. P1/ P5/ P9/ P11/ P22/ P91 etc.
Alloy Steel Seamless Pipe Heat Treatment
| P5, P9, P11, and P22 | |||
| Grade | Heat Treatment Type | Normalizing Temperature Range F [C] | Subcritical Annealing or Tempering Temperature Range F [C] |
| P5 (b,c) | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| Subcritical Anneal (P5c only) | ***** | 1325 – 1375 [715 – 745] | |
| P9 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P11 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1200 [650] | |
| P22 | Full or Isothermal Anneal | ||
| Normalize and Temper | ***** | 1250 [675] | |
| P91 | Normalize and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
| Quench and Temper | 1900-1975 [1040 – 1080] | 1350-1470 [730 – 800] |
Alloy Steel Welded Pipe Chemical Requirements
Buy MSL, ISMT, Jindal make Alloy Steel ERW Pipe at dealer price in Mumbai, check latest Low Alloy Pipe Price in India
| Seamless | ||||||
| P-5 | P-9 | P-11 | P-22 | P-91 | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. | |
| Tensile Strength, min., psi | ||||||
| ksi | 60 | 60 | 60 | 60 | 85 | |
| MPa | 415 | 415 | 415 | 415 | 585 | |
| Yield Strength, min., psi | ||||||
| ksi | 30 | 30 | 30 | 30 | 60 | |
| MPa | 205 | 205 | 205 | 205 | 415 | |
Alloy Steel Seamless Pipe Wall Thickness
| NPS [DN] Designator | Tolerance, % from Specified | |
| Over | Under | |
| 1/8 to 2 1/2 [6 to 65] incl., all t/D ratios | 20.0% | 12.5% |
| Above 2 1/2 [65], t/D < or = 5% | 22.5% | 12.5% |
| Above 2 1/2 [65], t/D > 5% | 15.0% | 12.5% |
| (t = Specified Wall Thickness; D = Specified Outside Diameter) | ||
Alloy Steel Pipe Elongation
| Calculated Minimum Elongation Values | |||||
| Elongation in 2 in. or 50 mm, min % | |||||
| Wall Thickness | P5, P9, P11, P22 | P91 | |||
| in. | mm | Longitudinal | Transverse | Longitudinal | |
| 5/16 (0.312) | 8 | 30 | 20 | 20 | |
| 9/32 (0.281) | 7.2 | 28 | 19 | 19 | |
| 1/4 (0.250) | 6.4 | 27 | 18 | 18 | |
| 7/32 (0.219) | 5.6 | 26 | 17 | ||
| 3/16 (0.188) | 4.8 | 24 | 16 | ||
| 5/32 (0.156) | 4 | 22 | 15 | ||
| 7/8 (0.125) | 3.2 | 21 | 14 | ||
| 3/32 (0.094) | 2.4 | 20 | 13 | ||
| 1/18 (0.062) | 1.6 | 18 | 12 | ||
Alloy Steel Welded Pipe Outside Diameter
Searching for Boiler Pipe suppliers in Mumbai? Distributor and stockist of Alloy Steel Seamless Pipe as per ANSI B36.19, custom length cutting service at NO EXTRA COST
| NPS [DN] Designator | Over | Under | ||
| in. | mm | in. | mm | |
| 1/8 to 1 1/2 [6 to 40], incl. | 1/64 (0.015) | 0.40 | 1/64 (0.015) | 0.40 |
| Over 1 1/2 to 4 [40 to 100], incl. | 1/32 (0.031) | 0.79 | 1/32 (0.031) | 0.79 |
| Over 4 to 8 [100 to 200], incl. | 1/16 (0.062) | 1.59 | 1/32 (0.031) | 0.79 |
| Over 8 to 12 [200 to 300], incl. | 3/32 (0.093) | 2.38 | 1/32 (0.031) | 0.79 |
| Over 12 [300] | +/- 1% of the specified outside diameter | |||
Seamless Alloy Steel Pipe Mechanical Tests
| Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test | |
| For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. | |
| For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. | |
| Notes for Hardness Test: | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. |
| Notes for Bend Test: | For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. |
| Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser. | |
| The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion. | |
| The inside diameter of the bend shall be 1 inch [25 mm]. | |
| Hydrostatic Test | Each length of pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used. |
Alloy Steel ERW Pipe price list
| SIZE” | SIZE NB | ALLOY STEEL A335 P5/ A213 T5 | ALLOY STEEL A335 P11/ A213 T11 | ALLOY STEEL A335 P22/ A213 T22 | ALLOY STEEL A335 P91/ A213 T91 |
|---|---|---|---|---|---|
| 1/2 | 15 | 3,970.59 | 1,764.71 | 2,058.82 | 5,441.18 |
| 3/4 | 20 | 3,897.06 | 1,691.18 | 1,985.29 | 5,367.65 |
| 1 | 25 | 3,823.53 | 1,617.65 | 1,911.76 | 5,294.12 |
| 1.25 | 32 | 3,794.12 | 1,588.24 | 1,882.35 | 5,264.71 |
| 1.5 | 40 | 3,750.00 | 1,544.12 | 1,838.24 | 5,220.59 |
| 2 | 50 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 2.5 | 65 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 3 | 80 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 3.5 | 90 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 4 | 100 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 5 | 125 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 6 | 150 | 2,382.35 | 1,205.88 | 1,500.00 | 5,029.41 |
| 8 | 200 | 2,411.76 | 1,235.29 | 1,529.41 | 5,058.82 |
| 10 | 250 | 2,411.76 | 1,235.29 | 1,529.41 | 5,058.82 |
| 12 | 300 | 2,411.76 | 1,235.29 | 1,529.41 | 5,058.82 |
| 14 | 350 | 2,426.47 | 1,250.00 | 1,544.12 | 5,073.53 |
| 16 | 400 | 2,426.47 | 1,250.00 | 1,544.12 | 5,073.53 |
| 18 | 450 | 2,441.18 | 1,264.71 | 1,558.82 | 5,088.24 |
| 20 | 500 | 2,441.18 | 1,264.71 | 1,558.82 | 5,088.24 |
| 22 | 550 | 2,470.59 | 1,294.12 | 1,588.24 | 5,117.65 |
| 24 | 600 | 2,470.59 | 1,294.12 | 1,588.24 | 5,117.65 |
Alloying Elements
Commonly used alloying elements and their effects are listed in the table given below.
| Alloying Elements | Effect on the Properties |
|---|---|
| Chromium | Increases Resistance to corrosion and oxidation. Increases hardenability and wear resistance. Increases high temperature strength. |
| Nickel | Increases hardenability. Improves toughness. Increases impact strength at low temperatures. |
| Molybdenum | Increases hardenability, high temperature hardness, and wear resistance. Enhances the effects of other alloying elements. Eliminate temper brittleness in steels. Increases high temperature strength. |
| Manganese | Increases hardenability. Combines with sulfur to reduce its adverse effects. |
| Vanadium | Increases hardenability, high temperature hardness, and wear resistance. Improves fatigue resistance. |
| Titanium | Strongest carbide former. Added to stainless steel to prevent precipitation of chromium carbide. |
| Silicon | Removes oxygen in steel making. Improves toughness. Increases hardness ability |
| Boron | Increases hardenability. Produces fine grain size. |
| Aluminum | Forms nitride in nitriding steels. Produces fine grain size in casting. Removes oxygen in steel melting. |
| Cobalt | Increases heat and wear resistance. |
| Tungsten | Increases hardness at elevated temperatures. Refines grain size. |
