Applications of Stainless Steel 304 Flanges
Stainless steel 304 is one of the most commonly used metals nowadays, due to its physical characteristics such as corrosion resistance, durability, and high strength, it’s highly regarded and chosen over other metals. Stainless Steel 304 Flanges are among the many items made from this alloy that is used in the commercial, industrial, and home sectors. This alloy is available in many shapes and sizes. This article examines eight different types of flanges and their use. Types Of Stainless Steel Flanges And Their Uses: Slide-on flanges [...]
ASME Boiler and Pressure Vessel Code
The ASME Boiler and Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that provides rules for the design, fabrication, and inspection of boilers and pressure vessels. A pressure component designed and fabricated in accordance with this standard will have a long, useful service life, and one that ensures the protection of human life and property. Volunteers, who are nominated to its committees based on their technical expertise and on their ability to contribute to the writing, revising, interpreting, [...]
What is MSS
Officially founded in 1924, the Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry is a non-profit technical association organized for development and improvement of industry, national and international codes and standards for.. ▸VALVES ▸VALVE ACTUATORS ▸PIPE FITTINGS ▸VALVE MODIFICATION FLANGES ▸PIPE HANGERS AND ASSOCIATED SEALS Primary function of MSS The primary function of MSS is to provide its members the means to develop engineering standard practices for the use and benefit of the industry and users of its products. The Society, the only [...]
Bend introduction, double-sided submerged arc bend, seamless bend, high-frequency welded bend, large diameter bend
Bending is the use of sets of bending equipment for bending, divided into cold simmer and hot push two kinds of processes. No matter what kind of machinery and equipment and pipelines, most of them are used to bend the pipe, mainly for oil, gas and liquid transmission, engineering bridge construction, etc.Standard systemInternational pipe flange standards mainly have two systems, namely, Germany DIN (including the former Soviet Union) as the representative of the European pipe flange system and the United States ANSI pipe [...]
About Q235(A3), Q235A, Q235B, Q235C, Q235D material introduction
Q235 plain carbon structural steel is also known as A3 steel.Plain carbon structural steel - plain is a steel material.Q stands for the yield limit of the material, followed by 235, which is the yield value of the material, around 235MPa. And will increase with the thickness of the material to make its yield value decreases, due to the moderate carbon content, comprehensive performance is better, strength, plasticity and welding and other properties to get a better match, the most widely used.Basic introductionQ235 [...]
Simple classification of welded elbows
(1) welded elbow materials are: carbon steel, aluminum, pipeline steel, alloy steel and stainless steel.(2) According to the elbow point of view, there are 45 degrees welded elbow, there are 90 degrees welded elbow and 180 degrees welded elbow and other different points of view of the elbow.(3) If divided by pressure level, there are about seventeen kinds, and the United States pipe standards are the same, there are: Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, Sch100, Sch120, [...]
Asme b16.9 BUTT WELDED ELBOW DATASHEET
Asme b16.9 butt welded elbowNPSO.D.D90°Long RadCenter to EndA45°Long RadCenter to EndB90°3DCenter to EndA45°3DCenter to EndB1/221.338163/426.738195724133.4382276311.1/442.2482595391.1/248.3572911447260.37635152632.1/273954419079388.911451229953.1/2101.6133572671114114.3152643051275141.3190793811576168.3229954571898219.13051276102521027338115976231612323.845719091437814355.6533222106744116406.46102541219505NPSO.D.D90°Long RadCenter to EndA45°Long RadCenter to EndB90°3DCenter to EndA45°3DCenter to EndB1845768628613725682050876231815246322255983834316766942461091438118297572666099140619818212871110674382134883307621143470228694632813121950224381010348641295533259110733691413725652743113538965144860028961200401016152463230481264421067160066032001326441118167669533531389461168175372735051453481219182975936581516Nominal Pipe Size1/2 to 2.1/23 to 3.1/245 to 8Outside Diameterat Bevel (D)+ 1.6- 0.81.61.6+ 2.4- 1.6Inside Diameter at End0.81.61.61.6Center to End LR (A/B)2222Center to End 3D (A/B)3333Nominal Pipe Size10 to 1820 to 2426 to 3032 to 48Outside Diameterat Bevel (D)+ 4- 3.2+ 6.4- 4.8+ 6.4- 4.8+ 6.4- 4.8Inside Diameter at End3.24.8+ 6.4- 4.8+ 6.4- 4.8Center to End LR (A/B)2235Center [...]
what is ASTM A234 butt welded fittings
ASTM A234 carbon steel pipe elbow seller,carbon steel WPB pipe end cap,ASTM A234 carbon steel 45/90/180 degree elbow,A234 carbon steel cross,ASTM A234 carbon steel butt weld pipe fittings manufacturer in Cangzhou,China.ASTM A234 Carbon Steel FittingsThere are a large number of fitting types, which are common in the industry. These are either forged or forged. However, forged fittings are produced from seamless tubes, while plates are used to make large diameter welded fittings. Moreover, they have different ends for making different connections such as [...]
what is manhole
Manhole (boiler, sewer for people in and out of maintenance), maintenance hole, sewer access hole: a hole often with a cover, people can enter and exit the drainage channel, boiler, sewer, and including telecommunications, cable TV use of the weak well, large bridges with internal access for maintenance, etc..Manhole is a safety emergency ventilation device installed on the top of the tank, usually used in conjunction with the fire arrester, mechanical breathing valve, not only to avoid accidents caused by accidental causes of [...]
The principle and characteristics of ultrasonic flaw detection
Ultrasonic flaw detection is the use of ultrasonic energy penetration into the depth of the metal material, and from a section into another section, in the interface edge of the characteristics of the reflection to view parts of a method of shortcomings, when the ultrasonic beam from the exterior of the parts by the probe to the metal interior, encountering the shortcomings and parts of the bottom of the separate onset of reflected waves to, in the fluoroscopic screen constitutes a pulse waveform, [...]
